• Standard cushion grip handles with no-slip surface and steel leaf springs
• Steel running through handle ensuring better strength and balance
• No edge bevel and no "pinch" in the middle of the material being cut
• Razor-Flush Edge cutting
• High grade Alloy Steel
• Set screw prevents the cutting edge from dulling
• Suitable for jewellery making, wire work, electronics and engineering work

Tip: For cutting thinner wire and softer metals try the Tronex Razor Flush Cutters

These are your day to day, general use, everyday wire cutters. The cutting edges come together very smooth, very flush, and these will give you the finest, flushest cut possible.

The acute angle on the side means that you can go flush to the surface to cut a piece of wire but still with room for your fingers and thumb to hold the tool properly. This means that you can cut very close up to the surface without any wire protruding when you've cut it. If you're a jeweller you're not going to lose any of that precious metal and you'll achieve great quality, fine cut.

Like other Tools in the Tronex range these feature the two-layer, comfortable handles which are ESD safe. The cutters also feature the well-known Tronex locked joint design with the metal sleeve running through one side, the hex bolt on the other, and inside where you can't see it, you have the Delrin Washer, which reduces metal contact so it gives a nice, smooth action to the cutters.

Caring for your Tronex Cutters

• Tip Protection Cap: Keep the red cap on the cutter when not in use to protect the cutting edge.
• Storage: Store properly in a cool, dry place.
• Cutting materials: NEVER cut hard wire, memory wire or stainless steel wire with your Tronex cutters. These materials could leave a permanent nick in your blades which is not repairable. Cut only soft metals such as sterling silver, gold, gold-filled, sterling silver and copper.
• Non-Jewelry Usage: Never use cutters for non jewelry cutting such as household, fishing or guitar strings.
• Gauge guidelines: Always stay within the recommended gauge range for your cutter type.
• Resharpening service available through Tronex.

High Grade Alloy Steel with razor sharp flush cutting edges

• Product Code: 5613
• Recommended gauge range: Middle of cutting edges: 29AWG-14AWG, Cutting at the tips: 19AWG