• Thin wall diamond drill bits-0
  • 4.5mm thin wall diamond electropolated core drill bits-1
  • 6mm electropplated thin walled diamond core drills-2
  • 7mm diamond hole saws with thin wall-3
  • 8mm thin walled diamond coated core drill bits-4
  • 9mm thin-walled precision diamond hollow drill bits-5
  • 10mm thin wall diamond coated core drills-6
  • 11mm thin wall diamond hole saw-7
  • 12mm electroplated diamond core drills-8
1 7

Thin Wall Diamond Core Drills

Thin Wall Diamond Core Drills

Eternal Tools

TWDCD450

  • Diameter sizes available from 4.5mm - 12mm
  • Wall thickness of between 0.4mm - 0.6mm

These electroplated diamond core drill bits have a thin wall compared with our standard diamond core drills. The diamond core thin wall allows for a more precise cut with a better surface finish and less chipping.  They should be used on delicate, hard materials such as optical glass, watch glass, sheet glass, thin glass, thin slices of stone, fossil, or any stone that is 6.5 or below on Moh's scale of hardness. 

These diamond core drills are manufactured and designed with a precision outer diameter for drilling a hole, and a thin wall to enable precision extraction of a core. 

If you're considering our diamond core drills for fossil preparation or sample extraction, we recommend referring to the technical tab below for inner core specifications and dimensions. This will help you make an informed decision about the suitability of our product for your specific needs.

***Sold Individually ***

£6.90
£6.90
Sale Sold out
Tax included.
Delivery information

Description

If you are a jeweller looking for diamond core drill bit sizes as small as 1mm - 3mm, please visit this page.

If you are using a rotary tool such as a Dremel, or a pendant drill, you might like to try our 6mm Bottle Neck Diamond Core drills. These have a 2.35mm shank (3/32").

Drilling of all other hard materials can be done using our standard Diamond Core Drills.

Helpful Note: The diameter size of the diamond core drill bit indicated refers to the hole size you will achieve. If you are looking to achieve a core rather than drill a hole please see the technical tab for the internal diameter of each core drill.

Tip: Use diamond core drill bits with plenty of cold water, slow speed (5,000 rpm) and low pressure

Helpful note: If you find the diamond drill bit skittering across the surface of your work, angle the drill to make the initial cut and then continue to drill vertically. 

Disclaimer. Using rotary tools near water has never been, to the best of our knowledge, endorsed by any of the rotary tool manufacturers. If you choose to drill near water or with attachments under water connected to your drill, then you do so at your own risk. Please be aware that mixing electricity and water can be very dangerous.

Technical

Diamond grit is precisely electroplated onto a steel shank

Diamond Core Drill Bit Sizes stated are +/- 0.1mm tolerance

4.5mm Diameter (+/- 0.1mm

  • Wall thickness: 0.4mm - 0.6mm
  • Overall length: 45mm
  • Parallel shank: 4.2mm
  • Inner core diameter: 3.2mm

5.0mm Diameter

  • Wall thickness: 0.4mm - 0.6mm
  • Overall length/drilling depth: 50mm
  • Parallel shank: 4.6mm
  • Inner core diameter: 3.6mm - 3.8mm

6.0mm Diameter

  • Wall thickness: 0.4mm - 0.6mm
  • Overall length/drilling depth: 50mm
  • Parallel shank: 5.6mm
  • Inner core diameter: 4.8mm

6.5mm Diameter

  • Wall thickness: 0.4mm - 0.6mm
  • Overall length/drilling depth: 50mm
  • Parallel shank: 6.2mm
  • Inner core diameter: 5.0mm

7.0mm Diameter

  • Wall thickness: 0.4mm - 0.6mm
  • Overall length/drilling depth: 50mm
  • Parallel shank: 6.7mm
  • Inner core diameter: 5.6mm - 5.8mm

7.5mm Diameter

  • Wall thickness: 0.5mm - 0.6mm
  • Overall length/drilling depth: 50mm
  • Parallel shank: 5.5mm
  • Inner core diameter: 6.3mm - 6.5mm

8.0mm Diameter

  • Wall thickness: 0.5mm - 0.6mm
  • Overall length: 50mm
  • Shank: 5.5mm
  • Drilling depth: 30mm
  • Inner core diameter: 6.7mm

8.5mm Diameter

  • Wall thickness: 0.4mm - 0.6mm
  • Overall length: 50mm
  • Shank: 5.7mm
  • Drilling depth: 30mm
  • Inner core diameter: 7.5mm

9.0mm Diameter

  • Wall thickness: 0.4mm - 0.5mm
  • Overall length: 50mm
  • Shank: 6mm
  • Drilling depth: 30mm
  • Inner core diameter: 8mm

9.5mm Diameter

  • Wall thickness: 0.5mm - 0.6mm
  • Overall length: 50mm
  • Shank: 6mm
  • Drilling depth: 30mm
  • Inner core diameter: 8.1mm - 8.2mm

10mm Diameter

  • Wall thickness: 0.4mm - 0.5mm
  • Overall length: 50mm
  • Shank: 6mm
  • Drilling depth: 30mm
  • Inner core diameter: 8.7mm - 8.9mm

10.5mm Diameter

  • Wall thickness: 0.5mm - 0.6mm
  • Overall length: 50mm
  • Shank: 6mm
  • Drilling depth: 30mm
  • Inner core diameter: 9.5mm - 9.7mm

11mm Diameter

  • Wall thickness: 0.5mm - 0.6mm
  • Overall length: 50mm
  • Shank: 6mm
  • Drilling depth: 30mm
  • Inner core diameter: 9.5mm - 9.8mm

11.5mm Diameter

  • Wall thickness: 0.4mm - 0.6mm
  • Overall length: 50mm
  • Shank: 6mm
  • Drilling depth: 30mm
  • Inner core diameter: 10mm

12mm Diameter

  • Wall thickness: 0.5mm - 0.6mm
  • Overall length: 50mm
  • Shank: 6mm
  • Drilling depth: 30mm
  • Inner core diameter: 10.5mm - 11mm

Customer Reviews

View full details

Customers Who Bought This Also Bought...

  • EVE Diablades for sharpening engraving tools-0

    Diablade Diamond Polishing Wheels for HSS and Carbide

    Diablade Diamond Polishing Wheels for HSS and Carbide

    From £29.95
    From £29.95
    Diablade Diamond Polishing Wheels for HSS and Carbide
    £29.95

    Keep your gravers razor-sharp by regularly resharpening and polishing them with these specially...

    VIEW DETAILS
    Choose Options
  • Diamond flexible sheet for grinding, sanding and polishing-0

    Diamond Abrasive Flexible Sheet

    Diamond Abrasive Flexible Sheet

    £38.78
    £38.78
    Diamond Abrasive Flexible Sheet
    £38.78

    This 4"x 4" (100 x 100mm) Diamond flexible abrasive sheet can be folded and manipulated for...

    VIEW DETAILS
    Choose Options
  • sander rolls mounted on a 2.35mm mandrel

    Sander Rolls. 2.35mm mandrel (Box of 10)

    Sander Rolls. 2.35mm mandrel (Box of 10)

    From £12.95
    From £12.95
    Sander Rolls. 2.35mm mandrel (Box of 10)
    £12.95

    These sanding rolls are mounted on a 2.35mm mandrel (3/32"). Each sander roll has a 60mm...

    VIEW DETAILS
    Choose Options
  • Flat Diamond needle file 600 grit-0

    Diamond Needle File. Tapered Flat. Fine 600 Grit

    Diamond Needle File. Tapered Flat. Fine 600 Grit

    £15.95
    £15.95
    Diamond Needle File. Tapered Flat. Fine 600 Grit
    £15.95

    These are our popular Fine 600-Grit Diamond Needle Files. These Flat files, or diamond rasps, taper...

    VIEW DETAILS

Recently Viewed Products