• Diamond Cone Burrs for shaping glass and stone-0
1 1

Diamond Cone Burrs

Diamond Cone Burrs

Eternal Tools

DCONEB3

Choose sizes from 3mm - 10mm

These Diamond Coated Cone Burrs are perfect for engraving, carving and sculpting in stone, glass, ceramic, porcelain and hard wood. Use in your pendant drill, rotary hand piece, hobby drill, engraver, micro motor or die grinder. Use with plenty of cold water, wearing protective safety goggles and face mask. Use with little pressure and do not exceed a drill speed of 12,000RPM. 

  • 3mm x 15mm, 3mm shank, 150 # (Medium)
  • 4mm x 15mm, 2.35mm shank, 150 # (Medium)
  • 5mm x 20mm, 5mm shank, 120 # (Coarse-Medium)
  • 6mm x 20mm, 6mm shank, 120 # (Coarse-Medium)
  • 8mm x 20mm, 6mm shank, 80 # (Coarse)
  • 10mm x 25mm, 6mm shank, 80 # (Coarse)

Helpful Note: If you are looking for a very fine point, you might like to try our Diamond Point Burs (These come in sizes as small as 0.6mm, 0.8mm...) Or for bevel edges to holes, try our Diamond Countersink Burrs. 

£4.50
£4.50
Sale Sold out
Tax included.
Delivery information

Technical

Diamond grit is precisely electroplated onto a steel shank

Diameter: 3mm at base, tapering to a point

  • Diamond coated length: 15mm
  • Overall length: 50mm
  • Shank: 3mm
  • Grit 150

Diameter: 4mm at base, tapering to a point

  • Diamond coated length: 15mm
  • Overall length: 42mm
  • Shank: 2.35mm
  • Grit 150

Diameter: 5mm at base, tapering to a point

  • Diamond coated length: 20mm
  • Overall length: 60mm
  • Shank: 5mm
  • Grit 120

Diameter: 6mm at base, tapering to a point

  • Diamond coated length: 20mm
  • Overall length: 60mm
  • Shank: 6mm
  • Grit 120

Diameter: 8mm at base, tapering to a point

  • Diamond coated length: 20mm
  • Overall length: 62mm
  • Shank: 6mm
  • Grit 80

Diameter: 10mm 80# (Coarse) at base, tapering to a point

  • Diamond coated length: 25mm
  • Overall length: 80mm
  • Shank: 6mm
  • Grit 80

Customer Reviews

View full details

Customers Who Bought This Also Bought...